[求助]阿尔卡特？？...

阿尔卡特4400酒店套房功能设置？？

[此贴子已经被作者于2010-8-10 19:02:03编辑过]

身不由己 · 发表于 2009-10-26 09:32:00

Object name: Categories > Phone Facilities Categories

Attributes:

Tel.Feature Category Id

:

Enter category number.

Routing Mode At Off Hook

:

Select

Delay Routing: for the set to be routed to a number after a timer when off hooked.
Direct Routing: for the set to be routed to a number as soon as it is off hooked.
Specialized incoming: so that the set cannot be used to make a call and is only authorized to receive calls.
NO Routing : the set is not routed when off hooked.
External Alarm: for off-hooking (loop closed) to generate an incident.

A call number has a corresponding routing table (also identified by a number).

Reminder: Routing tables only concern sets declared with immediate or delayed routing.

Object name: Specific Telephone Services > Routing Table

Attributes:

Routing No.

:

Enter the number of the routing table (select a number between 1 and 255).

Call number

:

Enter a call number. This number can be:

A routing table is associated with each set declared with immediate or delayed routing (i.e.dialing).

Object name: Users

Attributes:

Directory Number	:	Enter the directory number of the set.
Routing table	:	Enter the number of the routing table. Reset to zero, this attribute declares no routing table for the user concerned.

Reminder: This is a particular type of automatic off-hook dialing/routing. Re-routing is performed when a timer elapses.

Object name: System

Attributes:

Rout.On Immediate Forward.

:

Select True so that in the event of immediate forwarding, the set will be routed (when off-hooked) to the forwarded-to set after a timer.

The timer used for automatic off-hook dialing is timer n°2 (default value: 3 seconds).

The timer used for the special case of a set with immediate forwarding is timer n°20 (default value 12 seconds).

joesamp · 发表于 2010-1-28 21:38:00

最近正在研究OXE

电话交换机(PABX) 今日: 2023 |主题: 11205|排名: 45