BNA的设置...

<p>谁有关于霍尼的BNA的设置方法，谢谢！我的邮箱<a href="mailto:qinbiao2008@126.com">qinbiao2008@126.com</a></p>

BNA的设置<br/>1．To copy the BNA firmware to the FTP server:<br/> 从Honeywell 安装CD中 , 在thirdparty\bna firmware and copy：<br/>bna_SUSI_server_ver 1.0.0.x.bin (where x is the revision letter)<br/>to \inetpub\ftproot。<br/> 重新命名\inetpub\ftproot\bna_SUSI_server_ver 1.0.0.x.bin为<br/>bna_SUSI_server.bin.<br/>2．Specifying the IP Address and Loading the Firmware<br/>To specify the IP address and load the firmware:<br/> Connect a null modem RS-232 cable from the COM port on the<br/>computer to the BNA 9 -pin serial port.<br/>（用RS-232数据线连通电脑和BNA）<br/> 执行: “开始”\ “程序”\ “附件”\ “通讯”\ “超级终端”即："\Program<br/>Files\Windows NT\hypertrm.exe"进行参数设置：<br/>参数 设置<br/>Bit per second（通讯速度） 115200<br/>Data bits（数据位） 8<br/>Parity（奇偶校验） None<br/>Flow control（数据流控制） None<br/>Terminal emulation VT100<br/>Stop bits（停止位） 1<br/> A message should be displayed indicating the current password for<br/>root is not defined. There is no old password, so just press &lt; Enter&gt;<br/>to continue. If no text displays on the screen, use a paperclip to reset<br/>the BNA.<br/> After reset you are prompted to enter new password. Enter new<br/>password.<br/> Record the new password and file it somewhere safe and recallable.<br/>The following messages appear:<br/>User ‘root’ logged on<br/>BNA bootloader<br/> From the BNA bootloader prompt（Bootloader shell）,<br/>type‘np modify’ 。键入“np modify”后在出现的窗口中<br/>可以设置BNA的IP地址。<br/> 查看设置后的地址在进入设置界面后 选择“E”[即：BNA<br/>bootloader prompt（Bootloader shell）], 键入 ‘np display’<br/> 设置与BNA通讯的电脑（FTP server）IP地址则键入<br/>‘dc modify’<br/> Enter the following:<br/>a) IP address of FTP server.<br/>b) Complete path to firmware \bna_susi_server.bin (make sure<br/>that you start with a “\” because this points to the ftproot<br/>folder) AND then follow with the name of the firmware.<br/>c) Username on FTP server.leave as the default, which is<br/>“anonymous”。<br/>There is no password for anonymous (Press &lt;Enter&gt;).<br/> 查看设置后的地址在进入设置界面后 选择“E”[即：BNA<br/>bootloader prompt（Bootloader shell）], 键入 ‘dc display’<br/> 测试BNA与FTP server连接：<br/>进入设置界面后 选择“E”（即：Bootloader shell）<br/>键入‘dc test’<br/> 1.) A network connection is established<br/> 2.) The FTP server is found<br/> 3.) The OS file has been found<br/> 测试完成后在BNA Bootloader中键入‘load’。将<br/>“bna_susi_server.bin”下载到BNA中。<br/>完成BNA设置！！！

<p>谢谢楼上的兄弟</p>

<p>谢谢2楼的兄弟！！</p>

<p>ok</p>

<p>O(∩_∩)O~</p>

(⊙o⊙)哦

&nbsp;恩