关于NEC2400日夜切模式...

各位： 大家好! 请教一下，NEC2400如何做日夜切模式。 谢谢了。

有话务台吗

没有,只有功能话机. 请指点一下,相关的设置,感谢了.

？？？还没有搞定？

 

 

D-164D Day-Night Mode Status - Dterm(Series 8800 [R15] software feature)
General Description
This feature allows a Dterm telephone the ability to display the current 2400 IPX status and change the 2400 IPX into Day or Night using either the “*” or “#” key

 

Programming
STEP 1: ASFC - Assign to the Dterm telephone a Service Feature Class that allows SFI 214. Data must be “1”.
Note: For display only of Day/Night status SFI 214 must be “0”.
STEP 2: AKYD - Assign DAY/NIGHT Mode Key to a programmable Line/Feature Key. Assign KYI =1, FKY
= 153.

另外，日夜切需要实现的相关功能还要另外调试

 

Refer to the Service Conditions and Programming pertaining to the following features:
? ATTENDANT NIGHT TRANSFER [A-19]
? CENTRALIZED DAY/NIGHT MODE CHANGE - CCIS [C-56]
? DAY NIGHT CLASS OF SERVICE [D-15]
? LDN NIGHT CONNECTION [L-28]
? LDN NIGHT CONNECTION - CCIS [L-29]
? LDN NIGHT CONNECTION OUTSIDE [L-30]
? NIGHT CONNECTION - FIXED [N-1]
? NIGHT CONNECTION - FLEXIBLE [N-2]
? NIGHT CONNECTION - FIXED - CCIS [N-15]
? NIGHT CONNECTION - FLEXIBLE - CCIS [N-16]
? NIGHT CONNECTION OUTSIDE - SYSTEM [N-17]

以下是引用petermk在2010-2-3 15:17:00的发言：

D-164D Day-Night Mode Status - Dterm(Series 8800 [R15] software feature)
General Description
This feature allows a Dterm telephone the ability to display the current 2400 IPX status and change the 2400 IPX into Day or Night using either the “*” or “#” key

 

Programming
STEP 1: ASFC - Assign to the Dterm telephone a Service Feature Class that allows SFI 214. Data must be “1”.
Note: For display only of Day/Night status SFI 214 must be “0”.
STEP 2: AKYD - Assign DAY/NIGHT Mode Key to a programmable Line/Feature Key. Assign KYI =1, FKY
= 153.

 

谢谢！ petermk!

 我是这样设定的：

    ASFC ：TN:1,SFI:214  DAY/NIGHT(1~6全写“1”）

    AKYD ：KYI：1，FKY：153（16键）

    功能话机“0”上操作： 免提，（16键），*，设定。

     功能话机“0”上操作： 免提，（16键），#，取消。

  无法设定成功。

 

“另外，日夜切需要实现的相关功能还要另外调试

 

Refer to the Service Conditions and Programming pertaining to the following features:
? ATTENDANT NIGHT TRANSFER [A-19]
? CENTRALIZED DAY/NIGHT MODE CHANGE - CCIS [C-56]
? DAY NIGHT CLASS OF SERVICE [D-15]
? LDN NIGHT CONNECTION [L-28]
? LDN NIGHT CONNECTION - CCIS [L-29]
? LDN NIGHT CONNECTION OUTSIDE [L-30]
? NIGHT CONNECTION - FIXED [N-1]
? NIGHT CONNECTION - FLEXIBLE [N-2]
? NIGHT CONNECTION - FIXED - CCIS [N-15]
? NIGHT CONNECTION - FLEXIBLE - CCIS [N-16]
? NIGHT CONNECTION OUTSIDE - SYSTEM [N-17]”

这里不知道如何设定，请指点。谢谢!

 

 

 

     

看来这个问题确实难处理呀？？？