千家论坛_弱电智能化技术与工程讨论(建筑智能,家居智能,人工智能)

电话交换机(PABX)
收藏本版 (3) |订阅

电话交换机(PABX) 今日: 2023 |主题: 11205|排名: 45 

发新帖
打印 上一主题 下一主题

[讨论]procomm plus 好用的功能你知道嗎?...

[复制链接]
pbx9999 发布于: 2004-3-1 22:58 5141 次浏览 5 位用户参与讨论
跳转到指定楼层
計算機的專長是幫你做重複又無聊的工作 當然這只是功能之一 當你必須要快速的輸入一成不變的內容時 他就是一個秘密武器 在最快時間可以幫你完成工作 錄製過程以後可以幫你記錄輸入及比對輸出 按撥放可以自動執行 當然你如果懂得寫程序更可以對不同欄位輸出不同的值 一套nortel 61c 只要花4個小時就可以跑完 約500多個分機如果不是很複雜的話兩個小時可以完成 尤其是開語音郵箱更是輕鬆 還可以從lan近端遙控 有固定ip從遠端遙控設置也沒問題 你覺得好用嗎 有前輩能補充嗎?
回复

使用道具 举报

已有5人评论

新浪微博达人勋

千家认证

沙发
pabxman 发表于 2004-3-1 23:15:00
用脚本功能。
回复 支持 反对

使用道具 举报

新浪微博达人勋

千家认证

板凳
pabxman 发表于 2004-3-1 23:23:00
是这个吗? ;*********************************************************************** ;* * ;* REMOTE.ASP COPYRIGHT (C) 1990 DATASTORM TECHNOLOGIES, INC. * ;* * ;* Purpose : This ASPECT module illustrates a simple way to cause * ;* remote execution of a local script file. This provides an * ;* alternative to sending several remote commands separately where * ;* each command would require separate compilation before it could * ;* be executed. The file you send can be in source or compiled * ;* form. The name for the file received and executed at the * ;* remote machine is defined in REMFILE below. * ;* * ;* You could easily have a local script interact with the script * ;* being executed remotely using RGET or WAITFOR commands for * ;* timing or branching to specific tasks. You may also want to * ;* consider deleting the script from the remote upon completion of * ;* its execution. This could easily be accomplished by modifying * ;* this script to WAITFOR a response from the remote script which * ;* indicates that it has finished executing, and then issuing a * ;* remote command such as "^Ddos `"del $ASP_TMP.*`"^M". * ;* * ;* Remember : The remote machine MUST have Remote Commands set ON in * ;* its General Options setup screen. * ;* * ;*********************************************************************** define REMFILE "$ASP_TMP" ; filename received by remote proc main string filename,xmitfile,xmitstr integer extndx vidsave 0 box 4 18 18 60 14 atsay 5 24 15 "REMOTE SCRIPT EXECUTION FACILITY" atsay 6 19 14 "-----------------------------------------" atsay 8 20 15 "Enter the ASPECT filename:" atget 8 47 112 12 filename isfile filename if failure sound 220 10 atsay 10 20 15 "File not found..." pause 3 else find filename "." extndx substr xmitfile filename extndx 4 strupr xmitfile strfmt xmitfile "%s%s" REMFILE xmitfile atsay 10 20 15 "Sending script file to remote..." strfmt xmitstr "^Dgetfile xmodem `"%s`"^M" xmitfile transmit xmitstr atsay 12 20 15 "Pausing for remote compilation..." pause 5 sendfile xmodem filename if failure sound 220 20 atsay 14 20 15 "Error sending file to remote" pause 3 else pause 3 atsay 14 20 15 "Sending EXECUTE command sequence..." strfmt xmitstr "^Dexecute `"%s`"^M" xmitfile transmit xmitstr pause 3 sound 440 20 atsay 16 20 15 "Operation completed -- Press any key" keyget endif endif vidrest 0 endproc
回复 支持 反对

使用道具 举报

新浪微博达人勋

千家认证

地板
pbx9999 发表于 2004-3-1 23:56:00
ASPECT 是可以讓你編寫的語法請參考help 我已編寫許多修改程序但都是針對北電所編寫的 全都run過沒有問題
回复 支持 反对

使用道具 举报

新浪微博达人勋

千家认证

5#
pabxman 发表于 2004-3-2 00:01:00
过去在 DOS 版的 PCPLUS 写过一些,现在全回炉了。
回复 支持 反对

使用道具 举报

新浪微博达人勋

千家认证

6#
pbx9999 发表于 2004-3-2 00:36:00
那你很快可以上手的 多看些sample改一下就可以的 開檔語法迴圈很快的 我也是很快搞懂只要多看help
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册 新浪微博登陆 千家通行证登陆

本版积分规则

千家智客微信号
千家智客微信
玩物说商城
玩物说商城