我是初学者，怎样2501恢复出厂值？...

各位大哥： 小弟为初学者，我公司买了个二手cisco2501，里边被别人调了个乱七八糟，请问怎样让2501恢复出厂值？ 谢谢！

大哥，具体怎么做啊~！

weizx哥，实在是太感谢了！！！ 但问题随之而来，设备启动慢，显示如下信息，请问您怎么回事？ 8192K bytes of processor board System flash (Read ONLY) %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out) %Error opening tftp://255.255.255.255/router-confg (Timed out) %Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out) Press RETURN to get started!

weizx哥，您看，这是sh run 后的结果，但我copy后，还是出现了上面超时的画面，怎么回事啊？ Router#sh run Building configuration... Current configuration: ! version 12.0 service config service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! ! ip subnet-zero ! ! ! interface Ethernet0 ip address 192.168.1.201 255.255.255.0 no ip directed-broadcast ! interface Serial0 ip address 10.0.0.2 255.0.0.0 no ip directed-broadcast ! interface Serial1 no ip address no ip directed-broadcast shutdown ! ip classless ! ! line con 0 transport input none line aux 0 line vty 0 4 login ! end