千家论坛_弱电智能化技术与工程讨论(建筑智能,家居智能,人工智能)

无线网络(Wlan, 3G)
收藏本版 (5) |订阅

无线网络(Wlan, 3G) 今日: 2160 |主题: 5077|排名: 35 

发新帖

[推荐]无线AP主板...

[复制链接]
redwave 发布于: 2011-9-7 10:29 1340 次浏览 3 位用户参与讨论
跳转到指定楼层
Wireless Host Board (型号:RW2458N)



RW2458N
 

Features
● Atheros MIPS 24K 400MHz Network Processor
● 1 Mini PCIe slot
● 2 Ethenet ports
● Integrated passive Power-over-Ethernet
● Integrated with PoE cascade arrangement

TECHNICAL SPECIFICATIONS

 

HARDWARE INFORMATION

Processor

Atheros AR7240(400 MHz) Network Processor 

General Usage

CPE

System Memory

32MB(max 64MB optional)DDR SDRAM

NOR Flash

8MB(max 16MB optional)

PCIe Slot

1 x 9.2 mm Mini PCIe slot

Ethernet

2 X 10/100 Base-T Ethernet Port(with Auto MDI / MDIX) 

Serial Port 

1 x 4pin header(TTL)

Reset

Push Button Reset

Remote hardware reset(Optional)

Watch Dog Timer

Yes

PoE

Passive PoE (range 9V-28V DC)

DC Jack Input (optional)

Range 5V-28V DC

Power Consumption

3W (Host Board only)

RoHS Compliance

Yes

Humidity

Operating: 5% to 95%(non-condensing)Storage: Max.90% (non-condensing)

Temperature Range

Operating: -20oC to 70oC   Storage: -40oC to 90oC  

Dimensions

100 x 70 x 16(mm)

Weight

100g

 

APPLICATION

RF MODULE

802.11 WLAN

Atheros AR9285,b/g/n ,150Mbps

Atheros AR9283,b/g/n ,150&300Mbps

Atheros AR9287,b/g/n ,150&300Mbps

Atheros AR9280,a/b/g/n ,150&300Mbps

SOFTWARE INFORMATION

Firmware Support

Redwave,OpenWRT,DD-WRT

 

① The input power can come from an Ethernet port and it is fed to the other Ethernet port so that it can in turn drive another Passive PoE device.

② Serial Converter available to change the TTL signals on board to RS232 signals for debugging Configurations are subject to change without notice.

③ Please contact Redwave sales representatives for other available configurations.


回复

使用道具 举报

已有3人评论

新浪微博达人勋

千家认证

aitaoka 发表于 2011-9-29 10:23:00
不用到处找资料了
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册 新浪微博登陆 千家通行证登陆

本版积分规则

千家智客微信号
千家智客微信
玩物说商城
玩物说商城