千家论坛_弱电智能化技术与工程讨论(建筑智能,家居智能,人工智能)

电话交换机(PABX)
收藏本版 (3) |订阅

电话交换机(PABX) 今日: 2023 |主题: 11205|排名: 45 

发新帖
打印 上一主题 下一主题

OXO ACFE EXAM》》》》...

[复制链接]
笑弥陀 发布于: 2004-10-8 10:40 469 次浏览 3 位用户参与讨论
跳转到指定楼层

这是一份OXO ACFE认证试巻,总共30道题,时间45分钟,正确率75%为及格,试试看您能否通过认证。

Question 1:On which feature can you activate an anti-virus?

① VPN

② RAS

③ Email

④ Web surfing

Question 2:What is the possible use for user accounts created in Alcatel OmniPCX Office?

① For VPN Client

② To open a session on a NT PC

③ To open a connection to Alcatel OmniPCX Office

④ To open a session on the PM5 management tool

Question 3:How many rotating DDI numbers can be created in a hotel configuration ?

① Unlimited

② None

③ 128

④ 80

Question 4:What is the use of the "fax call routing" feature on Alcatel OmniPCX Office?

① To route a fax to a server

② To associate a fax with a specific number

③ To use a single DDI number to route fax calls to a fax and voice calls to a set

④ To route fax calls through the automated attendant

Question 5:Witch protocol is used during the connection to the ISP when checking the login and password ?

① PAP / CHAP

② POP

③ NAT

④ TCP/IP

Question 6:What is the function of the parameter "destination if restricted mode manually activated" in the time ranges menu ?

① Incoming attendant groups calls will be forwarded through a speed dial number in case of Restricted mode manual activation

② Sets forwarding to that destination when the restricted mode is active for these sets

③ Forwarding of incoming calls to that destination if the attendant calls diversion parameter is set to YES for the considered time range

④ Forwarding of incoming calls to that destination if the “Restricted Mode” is activated for the considered time range

Question 7

Which user(s) can open the general mailbox in an Alcatel OmniPCX Office?

① All if pwd has only numerics

② Only the default attendant set (physical address 01-001)

③ All members of attendant groups

④ Only authorised sets

Question 8

When using only the Internet Access configuration wizard (menu Wizard -> connection wizard), what can you configure ?

① Primary DNS address only

② Secondary DNS address only

③ Primary and secondary DNS address

④ Nothing, neither the primary DNS address nor the second one

Question 9

When using the callback (protected) mode for remote access :

① You can only modify the customer system in operator session

② You only have access to the anomaly messages

③ The remote site performs a recall of a preconfigured number

④ You can read but not modify the customer system parameters

Question 10

For which function do you use ETRN commands ?

① Firewall

② Proxy

③ E-mail

④ VPN

Question 11

On an Easy set, all resource keys have been deleted except one, what's the result ?

① It can set up a call even in restricted mode

② There can't be more than one call and that call can't be transfered

③ The system puts the set out of service

④ It can't call anymore

Question 12

What is the use of the parameter "diversion apply" in the dynamic routing menu ?

① To authorise dynamic forwarding

② To give priority to an immediate forwarding

③ To give priority to all kinds of forwarding except selective forwarding

④ To define if calls can be forwarded

Question 13

Set 103 has a selective forwarding including a “negative” list. What's the consequence ?

① List for which defined callers will be connected to 103

② List for which defined callers will be forwarded to the destination of the selective forwarding

③ List not taken into account after selective forwarding activation

④ All the sets except callers defined in the list will be connected to the 103 set

Question 14

What type of call can be managed by a general resource key ?

① Incoming internal and externals calls only

② Internal sets calls only

③ Outgoing internal and external calls only

④ Incoming and outgoing, internal and external calls

Question 15

When the POWER LED of the CPU is blinking red , what is the meaning ?

① A serious system anomaly is detected

② A mains failure near to the threshold of battery switch

③ The system is running a shutdown

④ The system is out of power

[此贴子已经被作者于2004-10-9 10:46:11编辑过]
回复

使用道具 举报

已有3人评论

新浪微博达人勋

千家认证

沙发
笑弥陀 发表于 2004-10-8 10:41:00

Question 16

Which is the MASTER link on an IBS connector ?

① The link connected to IBS 1-2 pins

② The link connected to IBS 3-4 pins

③ The 2 links are MASTERs

④ The link connected to IBS 1-4 pins

Question 17

A shutdown provokes :

① A system stop with a cold reset

② A system stop

③ A switch to battery power supply

④ A first start of the system

Question 18

How many expansion modules can be plugged ?

① 1

② 2

③ Depending on the software keys

④ Depending on the CPU

Question 19

What is the password to have access to installation wizards ?

① kilo1987

② tuxa1964

③ help1954

④ pbxk1064

Question 20

On which board, can you configure a DLT0 access ?

① BRA

② DLT0

③ DLT2

④ PRA

Question 21

What is the use of the " SUP " resource key ?

① On the attendant set, to receive attendant group calls

② To monitor the resource key of another set

③ To activate the manager calls screening on the secretary set

④ To monitor the state of a trunk

Question 22

Barring means :

① To forbid a call from an attendant set

② To authorise or forbid calls from a set to some internal numbers

③ To authorise or forbid calls from a set to some external numbers

④ To forbid some features to a set

Question 23

How many sets can you connect to a Multi-Reflexes interface?

① 1 analogue set and 2 Reflexes sets

② 2 analogue sets and 1 Reflexes set

③ 3 analogue sets

④ 3 Reflexes sets

Question 24

A user cannot activate a call back request on another busy user, why?

① In the feature rights of the called party the “camp on allowed” parameter is activated

② In the features of the call back initiator, the “automatic call back” is not activated

③ The called party is an analog set

④ The keyboard of the initiator is faulty

Question 25

The installation wizard creates automatically a manager/secretary group with a preconfigured feature, which one is it?

① The secretary screens the manager calls (to be activated)

② The manager calls are immediately forwarded to the secretary

③ The manager calls are forwarded on busy to the secretary

④ Dynamic routing after 12 seconds of the manager calls to the secretary

Question 26

What is the maximum number of cascades for a call ?

① Unlimited

② 2

③ 3

④ 5

Question 27

How many simultaneous communications does an IBS provide when equipped with two UA links?

① 8

② 6

③ 4

④ 3

Question 28

Which menu of this list cannot be copied from one set to another set?

① Dynamic routing

② Individual speed dial directory

③ Resource keys

④ Feature rights

Question 29

What do you have to do to power off the system in a secured state ?

① Disconnect the power supply

② Manage a shutdown by pressing the front button

③ Press the programmed key "Stop the system" on the operator set

④ Stop the system using PM5 menu

Question 30

The message “software key problem” can be resolved by :

① Shutting down the system

② Changing the software keys

③ Configuring the flag “SoftKeyMsg” in memory labels

④ Upgrading the system release

回复 支持 反对

使用道具 举报

新浪微博达人勋

千家认证

板凳
笑弥陀 发表于 2004-10-9 10:49:00
希望有高手能把它全答对,呵呵。好让我学习学习。
回复 支持 反对

使用道具 举报

新浪微博达人勋

千家认证

地板
drp 发表于 2004-10-14 10:33:00

Q1~Q10: 3,1,4,3,1,1,1,1,3,3

Q11~Q20: 2,4,1,1,3,1,2,2,4,1

Q21~Q30: 2,3,4,2,1,4,2,2,2,2

准确率应在90%以上

回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册 新浪微博登陆 千家通行证登陆

本版积分规则

千家智客微信号
千家智客微信
玩物说商城
玩物说商城