[推荐]无线AP主板...

Wireless Host Board (型号：RW2458N)

RW2458N

Features ● Atheros MIPS 24K 400MHz Network Processor ● 1 Mini PCIe slot ● 2 Ethenet ports ● Integrated passive Power-over-Ethernet ● Integrated with PoE cascade arrangement TECHNICAL SPECIFICATIONS   HARDWARE INFORMATION Processor Atheros AR7240（400 MHz） Network Processor  General Usage CPE System Memory 32MB（max 64MB optional）DDR SDRAM NOR Flash 8MB（max 16MB optional） PCIe Slot 1 x 9.2 mm Mini PCIe slot Ethernet 2 X 10/100 Base-T Ethernet Port（with Auto MDI / MDIX）  Serial Port  1 x 4pin header（TTL） Reset Push Button Reset Remote hardware reset（Optional） Watch Dog Timer Yes PoE Passive PoE （range 9V-28V DC） DC Jack Input (optional) Range 5V-28V DC Power Consumption 3W (Host Board only) RoHS Compliance Yes Humidity Operating: 5% to 95%（non-condensing）Storage: Max.90% （non-condensing） Temperature Range Operating: -20oC to 70oC   Storage: -40oC to 90oC   Dimensions 100 x 70 x 16（mm） Weight 100g   APPLICATION RF MODULE 802.11 WLAN Atheros AR9285，b/g/n ，150Mbps Atheros AR9283，b/g/n ，150&300Mbps Atheros AR9287，b/g/n ，150&300Mbps Atheros AR9280，a/b/g/n ，150&300Mbps SOFTWARE INFORMATION Firmware Support Redwave，OpenWRT，DD-WRT   ① The input power can come from an Ethernet port and it is fed to the other Ethernet port so that it can in turn drive another Passive PoE device. ② Serial Converter available to change the TTL signals on board to RS232 signals for debugging Configurations are subject to change without notice. ③ Please contact Redwave sales representatives for other available configurations.

不用到处找资料了