|
Features
● Atheros MIPS 24K 400MHz Network Processor
● 1 Mini PCIe slot
● 2 Ethenet ports
● Integrated passive Power-over-Ethernet
● Integrated with PoE cascade arrangement
TECHNICAL SPECIFICATIONS
|
|
HARDWARE INFORMATION |
|
Processor |
Atheros AR7240（400 MHz） Network Processor |
|
General Usage |
CPE |
|
System Memory |
32MB（max 64MB optional）DDR SDRAM |
|
NOR Flash |
8MB（max 16MB optional） |
|
PCIe Slot |
1 x 9.2 mm Mini PCIe slot |
|
Ethernet |
2 X 10/100 Base-T Ethernet Port（with Auto MDI / MDIX） |
|
Serial Port |
1 x 4pin header（TTL） |
|
Reset |
Push Button Reset |
|
Remote hardware reset（Optional） |
|
Watch Dog Timer |
Yes |
|
PoE |
Passive PoE （range 9V-28V DC） |
|
DC Jack Input (optional) |
Range 5V-28V DC |
|
Power Consumption |
3W (Host Board only) |
|
RoHS Compliance |
Yes |
|
Humidity |
Operating: 5% to 95%（non-condensing）Storage: Max.90% （non-condensing） |
|
Temperature Range |
Operating: -20oC to 70oC Storage: -40oC to 90oC |
|
Dimensions |
100 x 70 x 16（mm） |
|
Weight |
100g |
|
APPLICATION |
RF MODULE |
|
802.11 WLAN |
Atheros AR9285，b/g/n ，150Mbps
Atheros AR9283，b/g/n ，150&300Mbps
Atheros AR9287，b/g/n ，150&300Mbps
Atheros AR9280，a/b/g/n ，150&300Mbps |
|
SOFTWARE INFORMATION |
|
Firmware Support |
Redwave，OpenWRT，DD-WRT |
① The input power can come from an Ethernet port and it is fed to the other Ethernet port so that it can in turn drive another Passive PoE device.
② Serial Converter available to change the TTL signals on board to RS232 signals for debugging Configurations are subject to change without notice.
③ Please contact Redwave sales representatives for other available configurations.
| 