notel管理员培训资料
注释:DN代表分机号码
TN代表交换机终端号, X代表卡板位置,Y代表单元号
2616代表16键数字话机
2008代表8键数字话机
3901/3902/3903/3904代表数字话机
500代表模拟话机
设置交换机为编程方式
a. 接“LOGI”
b. 出现“PASS”
c. 输入密码
d. 按“>”
1. 改变系统时间
>LD 2
STAD DATE MONTH YEAR HOUR MINUTE SECOND (set the time)(查看交换机系统时间)
TTAD (显示系统时间)
2. 查找分机所在端口
>LD 20
REQ PRT
TYPE DNB
CUST 0
DN ****(extension number)
3. LD 32
STAT—观察状态
DISU—disable port关闭端口
ENLU—enable port启动端口
DISC—disable card关闭卡板
ENLC—enable card启动卡板
4. 改变数字分机号码
注意:在修改分机号码前先将TN关闭,修改完后再打开
a.>LD 32
DISU X Y
b.>LD 20
REQ CHG
TYPE 2616/2008/39xx
CUST 0
TN X Y
ECHG YES
ITEM KEY 0 SCR ****
ITEM
c.>LD 32
.ENLU X Y
5. 改变模拟分机号码
>LD 20
REQ CHG
TYPE 500
CUST 0
TN X Y
ECHG YES
ITEM DN ****
ITEM
6. 修改分机国际国内权限
>LD 20
REQ CHG
TYPE 2616/2008/39xx/500----(话机类型)
CUST 0
TN X Y
ECHG YES
ITEM NCOS 0 IDD
1 DDD
2 LOCAL
3 INTERNAL
ITEM CLS UNR (IDD)
TLD (DDD)
SRE (只可打内线, 模拟中继线有效)
ITEM
备注:NCOS权限参照LD 49里的内容
续
自动叫醒功能
LD 15
Data Block: AWU (Automatic Wake Up Data)
Prompt Response Comment
REQ: CHG Change existing data block
TYPE: AWU_DATA Automatic Wake Up Data
CUST 0-99 Customer number
AWU (NO) YES Automatic Wake Up
ATRC (NO) YES Attendant Recall allowed
RANF 0-511 Music route TYPE must be AWR in LD 16
RAN1 0-511 Primary Ran route TYPE must be AWR in LD 16
RAN2 0-511 Secondary RAN route TYPE must be AWR in LD 16
LA11 0-511 Primary RAN route for Language1
LA12 0-511 Secondary RAN route for Language1
LA21 0-511 Primary RAN route for Language 2
LA22 0-511 Secondary RAN route for Language 2
LA31 0-511 Primary RAN route for Language 3
LA32 0-511 Secondary RAN route for Language 3
LA41 0-511 Primary RAN route for Language 4
LA42 0-511 Secondary RAN route for Language 4
LA51 0-511 Primary RAN route for Language 5
LA52 0-511 Secondary RAN route for Language 5
R2BN 0-23 0-59 RAN2 Begin time; hour, minute
R2ED 0-23 0-59 RAN2 End time; hour, minute
NRWU 2-(5) Number of Rings for Wake Up before recall to attendant
TAWU 1-(3) Number of Tries for an unanswered AWU call
- WUD (NO) YES Is Wake-up Delimiter required
- - STE (NO) YES Is Standard Time Entry allowed?
计费输出.LD 15
Data Block: CDR (Call Detail Recording
Prompt Response Comment
REQ: CHG Change existing data block
TYPE: CDR_DATA Call Detail Recording
CUST 0-99 Customer number
IMPH (NO) YES CDR for Incoming Packet data call
OMPH (NO) YES CDR for Outgoing Packet data call
AXID (NO) YES Auxiliary Identification output in CDR record
TRCR (NO) YES Carriage Return sent after each CDR message
CDPR (NO) YES Coordinated Dialing Plan Record option
ECDR (NO) YES End-to-End Signaling digits in CDR record
OTCR (NO) YES CDR provided, based on Originally dialed
PORT 0-15 CDR port
- CNI a...a Calling Number Identification (a...a = (DGTS), CLID, or NONE)
CHLN (0)-23 Charge account number Length
FCAF (NO) YES Forced Charge Account active
CHMN (1)- CHLN Minimum number of digits for FCA code (Entry can be equal to or
less than response to prompt CHLN)
QQ;570661884 欢迎交流
很多看不懂,注释一下就更棒了。
学习了
好难
受教了 推
欢迎光临 千家论坛_智能建筑与智能家居技术交流社区 (http://bbs.qianjia.com/) | Powered by Discuz! X3.2 |