Cisco 2511路由器的PPP配置
Cisco2511路由器的配置
____Route#sh conf
____Using 1390 out of 32762 bytes
____!
____version 11.1
____service udp-small-servers
____service tcp-small-servers
____!
____hostname Router
____!
____enable secret 5 $1$Mpdg$2GnR7b4wj1RAHky.tM51m/
____enable password Cisco
____!
____username user1 password 7 021606481857
____username user2 password 7 120904040159
____username user3 password 7 140713181F57
____username user4 password 7 105E080A1643
____username user5 password 7 105E080a1642
____username user6 password 7 044B0A151C77
____!
____interface Loopback1
____ip address 200.200.200.18 255.255.255.0
____!
____interface Ethernet0
____ip address 20.23.28.53 255.255.255.0
____!
____interface Seria10
____no ip address
____shutdown
____no fair-queue
____!
____interface Serial1
____no ip address
____shutdown
____!
____interface Group-Async1
____ip unnumbered Loopback1
____encapsulation ppp
____keepalive 10
____async default routing
____async dynamic routing
____async mode dedicated
____down-when-looped
____ppp authentication pap
____no cdp enable
____group-range 1 8
____!
____router eigrp 200
____redistribute connected
____redistribute rip
____network 20.0.0.0
____network 200.200.200.0
____passive-interface async1
____passive-interface async2
____no auto-summary
____!
____router rip
____version2
____redistribute connected
____network 20.0.0.0
____network 200.200.200.0
____passive-interface async1
____passive-interface async2
____no auto-summary
____!
____ip route 200.200.200.1 255.255.255.255 Async5
____ip route 200.200.200.2 255.255.255.255 Async4
____snmp-sever community public RO
____!
____line con 0
____line 1 8
____modem InOut
____transport input all
____stopbits 1
____rxspeed 19200
____txspeed 19200
____line aux 0
____exec-timeout 0 30
____password cisco
____login
____modem InOut
____transport input all
____stopbits 1
____line vty 0 4
____psaaword cisco
____login
____!
____end
| 欢迎光临 千家论坛_智能建筑与智能家居技术交流社区 (http://bbs.qianjia.com/) | Powered by Discuz! X3.2 |